Announcement

Collapse
No announcement yet.

2jz gte

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2jz gte

    hi there,
    im just trying to price this up just need help
    what else what i need apart from the engine, gearbox, ecu

    i know you would need engine mounts to get the engine to fit but which ones?
    thanks

  • #2
    GS300 engine mounts work but the opposite way round I think..........You also need about £10K

    Comment


    • #3
      As with Dave,

      Lots and lots of money.

      engine, gearbox, possibly stock ecu to run alongside the standard one for a basic setup.

      then the custom work. youd have to price that up with whoevers doing it.

      Your best to find somewhere willing to take it on for a set price before they start.
      OutlawJapClub Admin Team

      Comment


      • #4
        and get the build cost and specifications IN WRITING, verbal contracts ain 't worth ****

        Comment


        • #5
          right i could get a good condition 2jzgte with the getrag v160 6 speed gear box and ecu and all the wireing for £3000.
          now i am going to contact the person whos going to do it and get a price in written

          will look for gs300 mounts
          thanks

          Comment


          • #6
            the gearbox alone goes fro 3k to my knowledge...for whats its worth go Dave reads route..you'll get 360 + bhp and it will work...........

            Comment


            • #7
              Agree with Dave here, your getting a good price if the gearbox and engine are in good nick.
              OutlawJapClub Admin Team

              Comment


              • #8
                I would buy the eng and 'box. Sell it for what it is worth and put the money towards Dave Reads conversion - as D/E says it works very well.

                Comment


                • #9
                  Erm what conversion is that

                  Comment


                  • #10
                    a rebuilt fe engine with turbo
                    OutlawJapClub Admin Team

                    Comment


                    • #11
                      How much will dave route set back?

                      Comment


                      • #12
                        You'd have to ask SPC horsham.

                        your looking a 6K without breaking a sweat i reckon.
                        OutlawJapClub Admin Team

                        Comment


                        • #13
                          Hmm if I could get a basic 2jz set up runnging for 8k I wouldn't mind
                          anything apart from engine mounts I need for a 2jz

                          Comment


                          • #14
                            Originally posted by Dave Ellen View Post
                            GS300 engine mounts work but the opposite way round I think..........You also need about £10K
                            hhmmmmm just love the way you put a price up, it all comes down to if he is goin g to do this or if he takes it some where to get done, if only you knew how much my V8 cost to do

                            Comment


                            • #15
                              im going to take it somewhere to get it done
                              but im just looking at a figure as i am going to get done hopefully summer next year so i know how much to save up

                              Comment

                              Working...
                              X